Component Forming & Counting
- The Best Selection for the effective production after PCBA is soldered.
- KA-66 is designed to trim the extra-long leads automatically and efficiently on the PB wthere components are inserted and soldered.
- A pair of conveyor chains in KA-66 clamps and delivers the PCB to be trimmed lead wires by high-speed turning blade (NK-200 or NK-250).
- PCB Warp prevention device and supporting pins are equioped to ensure no damnage and equal cut on baards.
- Linking conveyors are expandable.Opticnally, KA-66 can connect with wave soidering machines by inlet and outlet conveyors for autornatic thorough production line.
- Recommend using our Tungsten Carbide Blades NK-200 or NK-250. (optional accessorv)
- Don't recommend the after-cut lead length shorter than 0.8mm because PCB is damaged easily. If the lead wire is cut aiready, the cutter cannot cut it shorter due to strong pressure on short leads.
| Model (mm) | KA-8 | KA-66 |
| Type | Manual Feeding | Autimatuc |
| Thickness Pange | 0.8 - 1.2 & 1.6 - 2.0 | 0.8-2.5 |
| RPM of Spindle | 4500 | 4500 |
| HP | 1/2 HP | 3/4 HP |
| Feeding Speed | Depend on the operator | 0-3 M / minute |
| MIN Lead Height | 1.0 mm | 1.0 mm |
| PC(L)x(W) MAXPCB Working Sizes |
400 x 270 | 500 x 280 |
| Dimension | 1050(L) x 570(W) x 750(H) | 900 x 670 x 800 |
| Power | 110V/50Hz ; 220V/50Hz | 220VAC, 50/60Hz |
| Net Wight | 73 Kgs | 115 Kgs |
