Sensor
| Housing | |
|---|---|
| Style | Compact design |
| Overall size | Refer to section "Dimensional drawings" |
| Material | Stainless steel |
| Electrical Connection | |
| Connector variants | M12-A, 4-pin, polycarbonate |
| Ambient Conditions | |
| Operating temperature range | -40 ... 85 °C |
| Storage temperature range | -40 ... 85 °C |
| Humidity | < 98 % RH, condensing |
| Degree of protection (EN 60529) | IP67 IP69K (with appropriate cable) |
| Vibration (sinusoidal) (EN 60068-2-6) | 1.6 mm p-p (2 ... 25 Hz), 4 g (25 ... 100 Hz), 1 octave / min. |
| Process Connection | |
| Connection variants | Refer to section "Dimensional drawings" |
| Mounting position | Any (top, bottom, side) |
| Wetted parts material | PEEK Natura AISI 316L (1.4404) |
| Surface roughness wetted parts | Ra < 0.8 μm |
| Process Conditions | |
| Process temperature | Refer to section "Process conditions" |
| Process pressure | Refer to section "Process conditions" |
| Power Supply | |
| Voltage supply range | 8 ... 36 V DC |
| Current consumption | 25 mA typ., 50 mA max. |
| Reverse polarity protection | Yes |
| Power-up time | < 3 s |
| Output Signal | |
| Output type | PNP NPN Digital (push-pull) |
| Current rating | 100 mA max. |
| Short circuit protection | Yes |
| Voltage drop | PNP: (+Vs -0.5 V) ± 0.2 V, Rload ≥ 10 kΩ NPN: (+0.4 V) ± 0.2 V, Rload ≥ 10 kΩ |
| Off leak current | < 100 μA max. |
| Switching logic | Normally open (NO) Normally closed (NC) Active high Active low |
| Performance Characteristics | |
| Repeatability | ± 1 mm |
| Hysteresis | ± 1 mm |
| Response time | 0.02 s typ. |
| Media characteristics | DK > 1.5 |
| Damping | 0.0 ... 10.0 s (adjustable) |
| Factory Settings | |
| Switching range (dielectric constant DC) | < 75 % (DC > 2) |
| Damping | 0.1 s |
| Compliance and Approvals | |
| EMC Immunity | EN 61326 |
| EMC Emission | EN 61326 (installed in a metal tank) |
| Hygiene | FDA (21 CFR 177.2416) |
