Dispensing
Nordson EFD PTFE-lined Tips
Part No.：7018256 7005003 7018388 7005004
Our clog-free, PTFE-lined dispense tips are ideal for dispensing low-viscosity cyanoacrylates and other assembly fluids.
Our clog-free, PTFE-lined dispense tips are ideal for dispensing low-viscosity cyanoacrylates and other assembly fluids.
PTFE-lined Tips
Our clog-free, PTFE-lined dispense tips are ideal for dispensing low-viscosity cyanoacrylates and other assembly fluids.
The PTFE liner inside these crimped stainless steel dispensing tip shafts provide clog-free application of cyanoacrylates and provide extra control when making microdot deposits of low-viscosity fluids.
A unique SafetyLok™ hub thread ensures secure attachment to the syringe barrel. Each hub is designed with flush mating of the hub to the cutoff for smooth fluid flow and to prevent trapped air, which causes dripping and drooling.
Each hub is also manufactured and quality-tested to be free of molding flash – bits of plastic that can block fluid flow and cause inconsistent deposits.
All Optimum® dispensing tips are manufactured in the USA in silicone-free facilities to prevent fluid contamination and are certified for industrial use.
Tip hubs are color coded by size to help identify the gauge or internal diameter. Tips are also packaged in clear boxes for easy inventory control – with lot numbers, part numbers, and other information clearly labeled for greater process control and traceability.
Part Numbers
Resists clogging of cyanoacrylates. Use for microdot application of low viscosity fluids.
Our clog-free, PTFE-lined dispense tips are ideal for dispensing low-viscosity cyanoacrylates and other assembly fluids.
The PTFE liner inside these crimped stainless steel dispensing tip shafts provide clog-free application of cyanoacrylates and provide extra control when making microdot deposits of low-viscosity fluids.
A unique SafetyLok™ hub thread ensures secure attachment to the syringe barrel. Each hub is designed with flush mating of the hub to the cutoff for smooth fluid flow and to prevent trapped air, which causes dripping and drooling.
Each hub is also manufactured and quality-tested to be free of molding flash – bits of plastic that can block fluid flow and cause inconsistent deposits.
All Optimum® dispensing tips are manufactured in the USA in silicone-free facilities to prevent fluid contamination and are certified for industrial use.
Tip hubs are color coded by size to help identify the gauge or internal diameter. Tips are also packaged in clear boxes for easy inventory control – with lot numbers, part numbers, and other information clearly labeled for greater process control and traceability.
Part Numbers
| PTFE-lined Tips | |||||
| 12.7 mm (0.50") |
25.4 mm (1.0") |
Gauge | Color | ID | Qty/ Box |
| 7018256 | 7005003 | 21 |  Grey |
0.51 mm 0.020" |
50 |
| 7018388 | 7005004 | 25 |  Pink |
0.30 mm 0.012" |
50 |
Resists clogging of cyanoacrylates. Use for microdot application of low viscosity fluids.
