Servo Motor, PLC& HMI
Omron PLC CS Series Analog Input Units CS1W-AD041-V1/AD081-V1/AD161
Omron PLC
| Item | CS1W-AD041-V1 | CS1W-AD081-V1 | CS1W-AD161 |
| Applicable PLC model | CS series | ||
| Unit type | CS1 Special I/O Unit | ||
| Isolation *1 | Between I/O and PLC signals: Photocoupler (No isolation between individual I/O signals.) | ||
| External terminals | 21-point detachable terminal block (M3 screws) | Two 34-pin MIL connectors | |
| Affect on CPU Unit cycle time | 0.2 ms | ||
| Power consumption | 120 mA max. at 5 VDC, 90 mA max. at 26 VDC | 150 mA max. at 5 VDC,
55 mA max. at 26 VDC |
|
| Dimensions (mm) *2 | 35 ´ 130 ´ 126 (W ´ H ´ D) | 35 ´ 130 ´ 119 (W ´ H ´ D) | |
| Weight | 450 g max. | ||
| General specifications | Conforms to general specifications for SYSMAC CS Series. | ||
| Mounting position | CS-series CPU Rack or CS-series Expansion Rack
(Cannot be mounted to a C200H Expansion I/O Rack or a SYSMAC BUS Slave Rack.) |
||
| Maximum number of Units | Depends on the power supply Unit. *3 | ||
|
Data exchange with CPU Units *4 |
Special I/O Unit Area in CIO Area (CIO 2000 to CIO 2959): 10 words per Unit Special I/O Unit Area in DM Area (D20000 to D29599): 100 words per Unit |
Special I/O Unit Area in CIO Area (CIO 2000 to CIO 2959): 20 words per Unit
Special I/O Unit Area in DM Area (D20000 to D29599): 200 words per Unit |
|
| Number of analog inputs | 4 | 8 | 16 |
|
Input signal range *5 |
1 to 5 V
0 to 5 V 0 to 10 V -10 to 10 V 4 to 20 mA *6 |
||
| Maximum rated input (for 1 point) *7 | Voltage Input: ±15 V Current Input: ±30 mA | ||
| Input impedance | Voltage Input: 1 MΩ min.
Current Input: 250 Ω (rated value) |
||
| Resolution | 4,000/8,000 *8 | ||
| Converted output data | 16-bit binary data | ||
| 23±2°C | Voltage Input: ±0.2% of full scale Current Input: ±0.4% of full scale | Voltage Input: ±0.2% of full scale Current Input: ±0.2% of full scale | |
| 0°C to 55°C | Voltage Input: ±0.4% of full scale Current Input: ±0.6% of full scale | Voltage Input: ±0.4% of full scale Current Input: ±0.4% of full scale | |
| A/D conversion time *10 | 1.0 ms or 250 ms per point max. *8 | ||
| Mean value processing | Stores the last “n” data conversions in the buffer, and stores the mean value of the conversion values. Buffer number: n = 2, 4, 8, 16, 32, 64 | ||
| Peak value holding | Stores the maximum conversion value while the Peak Value Hold Bit is ON. | ||
| Input disconnection detection | Detects the disconnection and turns ON the Disconnection Detection Flag. *11 | ||
|
Scaling function |
None |
None |
Enabled only for conversion time of 1 ms and resolution of 4,000. Setting any values within a range of ±32,000
as the upper and lower limits allows the A/D conversion result to be output with these values as full scale. |
